|
Product Details:
Payment & Shipping Terms:
|
| Brand Name: | Bohyar | Drive Mode: | Diesel |
|---|---|---|---|
| Rated Flow: | Q=90L/min | Electric Motor Power: | N=28KW(36HP) |
| Electric Motor Rotate Speed: | N=2600r/min | Overall Size: | 1386x1200x1500(mm) |
| Highlight: | diesel driven hydraulic power units,diesel hydraulic power pack |
||
The diesel hydraulic truck HS-36 consists of diesel engine and a gear pump. Core parts are imported brands, which keeps machine in stable and safe operation .The trolley body is controlled by touch screen, which enables ease of operation and better display.
HS series of diesel hydraulic power units, can meet the requirements of various industries, such as: Petrochemical Plant, Power Station, Nuclear Power Station, , Boiler Plant, Refinery.
■ The oil cooling system can ensure that the equipment operate continuously within 40 ºC ambient temperature.
■ Portable, easy to handle with imported lightweight Core parts with high quality and long service life.
■ It adopts step less speed control system to adjust the different speed.
■ The quick connector can be quickly plugged and pulled without leakage to ensure that users can quickly access.
■ Drilling and cutting can be achieved under the use of double oil passages.
| Model | HS-36 |
| Drive mode | Diesel |
| Rated flow | Q=90L/min |
| Rated power | N=28KW(36HP) |
| Rated speed | n=2600 r/min |
| Rated pressure | P=15Mpa |
| Shipping dimensions | 1386x1200x1500(mm) |
| Shipping weight | 800kg |
■ Select the suitable oil passage and connect the hose between the operating valve block and the load. The fitting needs to be tightened to ensure no oil leakage, also connect the hydraulic hose to the hydraulic motor.
■ The machine needs to be heated when the ambient temperature is below 10 ℃. The hydraulic oil will be automatically heated at low temperatures. Just open the cabinet inside the inverter switch and push the switch to “On”, the system will automatically preheat for 15mins, then the cabinet heats up the indicator lamp which will always be on. The heat will be extinguished when the lamp is ended. At the same time, make sure the ball valve handle is in the OFF position, and then turn the start key to the START position to start the diesel engine. For more detailed diesel engine maintenance, please refer to the operating instructions of the diesel engine.
■ Turn the ball valve in the figure below slowly clockwise (the maximum rotation angle is 90 °) and observe the rotation speed of the load to reach the appropriate speed.
■ Oil cooler governor valve and relief pressure regulator has been adjusted before leaving the factory. It’s not necessary to operate in the use of the process. And only need to adjust the corresponding oil throttle valve to adjust the speed of the oil load.
■ When finished, turn the ball valve counterclockwise to position the ball valve handle and turn the control key to the OFF position to stop the engine
■ Check whether the electrical component wirings are loose or false welding.
■ Check the battery power.
■ Add low temperature anti-wear hydraulic oil from the oil filler of tank to the top of fluid level meter. Fuel tank after refueling should not immediately boot unless the bubble in the tank naturally disappears. Relax the handle of the relief valve counterclockwise.
■ The distance between the diesel hydraulic power station and the used equipment is at least 5 meters.
■ It is prohibited to connect the mechanical equipment and tools which are easy to produce sparks with the diesel hydraulic power unit.
Contact Person: Kaisa
Tel: +8615050158266
Fax: 86-512-66065466
| Sales office:No. 28 Datong Road, Xuguan Town, Suzhou New District, P. R. China, Suzhou, Jiangsu, China | |
| +86-512-66322212 | |
| globalsales@bohyar.com | |
